Snmp Community - Efficient Networks Router family Command Line Interface Manual

Chapter 17: SNMP Commands

snmp community

Sets the SNMP community to which the router belongs; the default community is
"public". For additional information on SNMP, see
NOTE:
This command requires a
Mgmt Class
Network (R/W)
Input Format
snmp community <snmp community name>
Parameters
***
a
<name>
a
ASCII string, 1 - 40 characters with no white-spaces (public)
Example
The following example sets the SNMP community name to iads:
-> snmp community iads
Response
Example response when the command is entered with no community name
parameter:
-> snmp community
SNMP Community name: iads
Page 17-4
save to be persistent across reboots.
When entered with no parameters, the current SNMP community
name is displayed.
SNMP community name.
®
Efficient Networks
Command Line Interface Guide
"SNMP" on page 7-2.
Efficient Networks
Router family
®