System Telnetport - Efficient Networks Router family Command Line Interface Manual

Chapter 4: System Commands
Parameters
default
disable
a
<port>
a
Integer
Examples
This command sets the Syslog port to the default value (514).
-> system syslogport default
This command disables the existing Syslog port.
-> system syslogport disabled
This command remaps the syslog port to port 154.
-> system syslogpport 154
Response
Command prompt.

system telnetport

This command manages the built-in Telnet server port access. It can:
• Disable Telnet port for this router (sets the Telnet port to 0).
• Request the default Telnet port (23). This re-enables Telnet port after it is
disabled.
• Redefine the Telnet port.
NOTE:
This command requires a
To see the current setting, use the
Mgmt Class
Network (R/W)
Input Format
system telnetport default | disabled | <port>
Page 4-66
Restores the port value to the default value 514 and re-enables the port.
Disables the existing Syslog port.
Defines a new Syslog port number. Use this option to restrict remote ac-
cess.
save and
Efficient Networks
Command Line Interface Guide
reboot to take effect.
system list command.
®
Router family
®
Efficient Networks