Bridge Filtering Commands; Filter Br - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
Bridge Filtering
feature can be used to enhance security or improve performance. Filtering is based
on matched patterns within the packet at a specified offset. Two filtering modes are
available:
• Deny mode will discard any packet that matches the deny filter database and
let all other packets pass.
• Allow mode will only pass the packets that match the allow filter database
and discard all others.
Up to 40 deny and 40 allow filters can be activated from the filter database.
The Bridge Filtering commands found in this section include:
Command

filter br ?

filter br add
filter br del
filter br list
filter br use
filter br ?
Lists the supported Bridge Filtering keywords.
Mgmt Class
Security (R/W)
®
Efficient Networks

BRIDGE FILTERING COMMANDS

CHAPTER 10
allows you to control the packets transferred across the router. This
Table 10-1: Bridge Filtering Command Listing
Lists the supported bridge filtering keywords.
Adds a bridging filter to the filtering database.
Deletes a bridging filter from the filtering database.
Lists the bridging filters in the filtering database.
Sets the filtering mode.
Chapter 10: Bridge Filtering Commands
CHAPTER 10
Function
Page 10-1