Switch Mirror - Efficient Networks Router family Command Line Interface Manual

Chapter 21: Switch Commands

switch mirror

Configures port traffic mirroring. Switch mirroring allows traffic from an Ethernet
port(s) to be mirrored to another Ethernet port. Switch mirroring is disabled by default.
NOTE:
Port 9 is the uplink of the switch to the WAN/router.
Mgmt Class
Network (R/W)
Input Format
switch mirror [on | off | capture <port> | map <port>| unmap
<port>]
Parameters
***
on
off
capture <port>
map <port>
unmap <port>
1
Integer
2
When a capture <port> parameter is specified on the command line, port mirroring is auto-enabled.
Example
The following example will enable port mirroring; traffic from ports 3 and 4 will be
mirrored to the capture port 6:
-> switch mirror capture 6
-> switch mirror map 3
-> switch mirror map 4
Page 21-4
When entered with no parameters, the current port mirroring state
information is displayed; see
Enables port mirroring function. If no additional parameters are
supplied, the current mirroring configuration is used.
Disables port mirroring function. Mirror settings are not changed.
1
Specifies the port that will capture traffic from the mirrored port.
1
Specifies the port that will to be mirrored. Multiple ports can be
mapped to the capture port.
1
Un-maps the specified port.
Efficient Networks
Command Line Interface Guide
below.
Response
Efficient Networks
®
Router family
2
®