Firewall Setudpfloodthreshold; Firewall Viewdroppkts - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

firewall setudpfloodthreshold

As a method to prevent a flooding of the system with User Datagram Protocol (UDP)
packets, use this command set the threshold value for the number of UDP packets
per second. When the specified threshold is exceeded, the firewall will block any
subsequent UDP packets until the UDP traffic drops below the threshold value. For
more information on UDP attacks, see
Mgmt Class
Security (R/W)
Input Format
firewall setudpfloodthreshold <number>
Parameters
a
<number>
a
Integer (1000)
Response
Command prompt.

firewall viewdroppkts

Displays a listing of up to 200 of the most recent dropped packets.
Mgmt Class
Security (R/W)
Input Format
firewall viewdroppkts <number>
Parameters
a
<number>
a
Integer 1 - 200 (200)
®
Efficient Networks
Threshold value in packets per seconds.
Specifies the number of dropped packets to display.
Chapter 18: Stateful Firewall Commands
"Stateful Firewall" on page 4-34.
Page 18-17