System Addhttpfilter - Efficient Networks Router family Command Line Interface Manual

Chapter 4: System Commands

system addhttpfilter

Enables blocking all devices except those within the defined IP address range from
using the HTTP protocol (for example, to browse the Web). This command can block
devices on the WAN from accessing the Web browser. This validation feature is off by
default.
NOTE:
This command does not require a reboot and is effective immediately.
NOTE:
To list the range of allowed clients, use the command system list when you are logged
in with read and write permission (be sure to log in with password). To delete
addresses from the HTTP filter, use the
For more information, see
Technical Reference Guide.
Mgmt Class
Security (R/W)
Input Format
system addhttpfilter <first ip addr> [<last ip addr>] | lan
Parameters
<first ipaddr>
<last ipaddr>
lan
a
Dotted-decimal notation
b
May be omitted if the range contains only one IP address.
Response
Command prompt.
Page 4-8
"Controlling Remote Management" on page 5-15
a
First IP address in the range.
a
Last address in the range of IP addresses to be remapped.
Local Ethernet LAN.
Efficient Networks
Command Line Interface Guide
system delhttpfilter command.
®
Router family
of the
b
®
Efficient Networks