Snmp Enablesnmpif; Snmp List - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
Parameters
wan | lan
Response
Command prompt.

snmp enablesnmpif

Enables SNMP access from the specified interface. To see the current interface(s)
enabled, use the command
NOTE:
This command does not require a reboot and is effective immediately.
Mgmt Class
Network (R/W)
Input Format
snmp enablesnmpif <wan|lan>
Parameters
wan | lan
Response
Command prompt.

snmp list

Displays current SNMP configuration information.
NOTE:
If changes to the SNMP configuration have been made since the last reboot, the
changes will be displayed, but may not be in effect until after a
Mgmt Class
Network (R)
®
Efficient Networks
Interface from which SNMP access will be disabled.
snmp list.
Interface from which SNMP access will be enabled.
Chapter 17: SNMP Commands
save and reboot.
Page 17-7