Chapter 18: Stateful Firewall Commands
firewall set
Enables or disables the stateful firewall configuration. To view the current firewall
status, use the
NOTE:
Firewall rules can be added, deleted, or modified regardless of the firewall status.
Mgmt Class
Security (R/W)
Input Format
firewall set on | off
Parameters
on
off
Response
Command prompt.
firewall setdroppktthreshold
Specifies a threshold value for the number of dropped packets per second (due to a
firewall rule). When the threshold value is exceeded, a message will be logged to the
console. To view the current threshold value, use the
Mgmt Class
Security (R/W)
Input Format
firewall setdroppktthreshold <number>
Page 18-14
firewall list
command.
Enables the firewall as currently configured.
Disables the firewall.
®
Efficient Networks
Router family
Command Line Interface Guide
firewall list
command.
Efficient Networks
®