Eth Ipx Enable - Efficient Networks Router family Command Line Interface Manual

Chapter 5: Ethernet Interface Commands
NOTE:
This command requires a reboot.
Mgmt Class
Network (R/W)
Input Format
eth ipx disable [port#]
Parameters
a
<port>
a
Integer, 0, 1 or it may be omitted.
Response
Command prompt.

eth ipx enable

Enables IPX routing across the Ethernet LAN. This acts as a master switch allowing
you to enable IPX routing.
NOTE:
This command requires a reboot.
Mgmt Class
Network (R/W)
Input Format
eth ipx enable [port#]
Parameters
a
<port>
a
Integer, 0, 1 or it may be omitted.
Response
Command prompt.
Page 5-34
Port number of the Ethernet LAN.
Port number of the Ethernet LAN.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®