®
Efficient Networks
Router family
Command Line Interface Guide
eth ipx frame
Sets the frame encapsulation method.
Mgmt Class
Network (R/W)
Input Format
eth ipx enable <type>
Parameters
<type>
a
Default value
Response
Command prompt.
eth list
Lists information about the Ethernet interfaces including the status of bridging and
routing, IP protocol controls, and IP address and subnet mask.
Mgmt Class
Network (R)
Input Format
eth list [<interface>]
Parameters
***
<interface>
a
For a dual-port router, you may specify the port number(0 or 1).
®
Efficient Networks
802.2 (DEC standard).
802.3 (Intel standard).
dix (Xerox/Ethernet II standard).
If the command is entered with no parameters, information is listed
for all Ethernet interfaces in the router.
a
Ethernet interface for which information is listed.
Chapter 5: Ethernet Interface Commands
a
Page 5-35