Remote Addhostmapping - Efficient Networks Router family Command Line Interface Manual

Chapter 6: Remote Commands

remote addhostmapping

Remaps a range of local LAN IP addresses to a range of public IP addresses on a
per-remote-router basis. These local addresses are mapped one-to-one to the public
addresses.
NOTE:
The range of public IP addresses is defined by <first public addr> only. The rest of the
range is computed automatically (from <first public addr> to <first public addr> +
number of addresses remapped - 1) inclusive.
Mgmt Class
Network (R/W)
Input Format
remote addhostmapping <first private addr> <second private
addr> <first public addr> <remoteName>
Parameters
<first private addr>
<second private addr>
<first public addr>
<remotename>
a
Dotted-decimal notation
b
ASCII string
Response
Command prompt.
Page 6-8
a
First IP address in the range of local IP address to be
remapped.
a
Last IP address in the range of local IP address to be
remapped.
a
Defines the range of public IP addresses.
b
Name of the remote router.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®