System Addsyslogfilter - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

system addsyslogfilter

Limits the Syslog server addresses that may be returned by DHCP. By default, this
validation feature is off.
The Syslog filter can comprise one or more ranges of IP addresses that DHCP may
return for Syslog servers. To delete addresses from the Syslog filter, use the
delsyslogfilter
This command does not affect the Syslog server addresses that you specify explicitly.
For more information on the router as a Syslog client, see
of the Technical Reference Guide.
NOTE:
This command does not require a reboot and is effective immediately.
NOTE:
To list the range of allowed clients, use the
Mgmt Class
Security (R/W)
Input Format
system addsyslogfilter <firstipaddr> [<last ipaddr>] | lan
Parameters
<first ipaddr>
<last ipaddr>
lan
a
Dotted-decimal notation
b
May be omitted if the range contains only one IP address.
Response
Command prompt.
®
Efficient Networks
command.
a
First IP address of the valid server range.
a
Last IP address of the valid server range.
Local Ethernet LAN.
Chapter 4: System Commands
"Syslog Client" on page 7-1
system list command.
b
system
Page 4-13