Dsp Provision - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

dsp provision

Sets the signalling the method in which phone lines (or trunks) are seized and
released.
Mgmt Class
Voice (R/W)
Input Format
dsp provision <port> <loop | ground>
Parameters
***
a
<port>
loop
ground
a
Integer, 1 - 4 (or 1 - 8 for 8-port IADs)
b
When command is entered with <port> and no method <loop | ground>, the current port configuration
is displayed.
Example
The following command example will configure voice port 4 for ground start.
-> dsp provision 4 ground
Response
Typical response when entered with no parameters:
-> dsp provision
[ 1]: Loop Start
[ 2]: Loop Start
[ 3]: Loop Start
[ 4]: Loop Start
Typical response when configuration has been changed:
-> dsp provision 4 ground
[ 4]: Ground Start
®
Efficient Networks
When entered with no parameter, the current configuration is dis-
played
Voice port to configure.
Sets voice signalling method to loop start
Sets voice signalling method to ground start
Chapter 13: Voice Commands
b
Page 13-5