Time - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

time

Displays or changes the current time on the router's clock. To change the current
date, use the command date.
Automatic SNTP requests are generated if the system needs to get the time. You can
specify an SNTP server using the command
command
Mgmt Class
All (R/W)
Input Format
time <hh:mm:ss>
Parameters
***
a
<hh>
b
<mm>
b
<ss>
a
Integer, 1 - 23
b
Integer, 0 - 59
Response
When entered with no parameters:
-> time
BootTime:
Current time:
When entered with parameters:
-> time 1:01:01
Time set to UTC-420, 5/18/2001 at 1:01:01.074
Time adjusted for (-) 0 days 11 hours 49 minutes 34 seconds
®
Efficient Networks
sntp offset.
When entered with no parameters, current time and date is
displayed.
Hour parameter.
Minute parameter.
Second parameter.
5/18/2001 at 11:57:12
5/18/2001 at 12:00:01
Chapter 2: Status Commands
sntp server and a UTC offset with the
Page 2-29