Idsl Commands; Idsl List - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

IDSL Commands

This section describes the following commands used to manage an IDSL interface.
The IDSL commands found in this section include:
Command

idsl list

idsl save
idsl set speed
idsl set switch
remote setdlci
remote setprotocol
idsl list
Lists the current switch type. To change the switch type, use the
command.
Mgmt Class
Network (R)
Input Format
idsl list
Parameters
None
Response
Typical response:
-> idsl list
Switch type is FR128
®
Efficient Networks
Table 7-8: IDSL Command Listing
Lists the current switch type.
Saves the IDSL-related changes across restarts and re-
boots.
Specifies the speed of the IDSL connection.
Specifies link speeds of 64, 128, or 144 Kbps for the
IDSL connection.
Sets the DLCI for the remote router entry.
Specifies the appropriate link protocol for the IDSL con-
nection.
Chapter 7: WAN Interface Commands
Function
idsl set switch
Page 7-27