Ike Peers Set Peerid; Ike Peers Set Peeridtype - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

ike peers set peerid

Sets the peer ID for the IKE peer connection. This command is used only when
aggressive mode has been selected by the
name.
The peer ID must match the local ID on the other end of the connection. The peer ID
can be an IP address, domain name, or e-mail address as specified by the
set peeridtype
5-56.
Mgmt Class
Security (R/W)
Input Format
ike peers set peerid <aggressivemodeid> <peername>
Parameters
<AggressiveModeID>
<peername>
a
Dotted-decimal notation, ASCII string
b
ASCII string
c
To see the peer names, use the
Example
-> ike peers set peerid example.efficient.com my_aggressive_peer
Response
Command prompt.

ike peers set peeridtype

Sets the type of the peer ID for the IKE peer connection. This command is used only
when aggressive mode has been selected by the
this peer name.
The local peer type must match the local ID type on the other end of the connection.
The possible ID types are IP address, domain name, or e-mail address. For more
information, see
Mgmt Class
Security (R/W)
®
Efficient Networks
command. For more information, see
IP address
b
Name of the IKE peer whose peer ID is specified.
ike peers list
"IKE Peer Commands" on page 5-56.
Chapter 12: IKE/IPsec Commands
ike peers set mode
"IKE Peer Commands" on page
a b
, domain name , or e-mail address.
command.
ike peers set mode
command for this peer
ike peers
c
command for
Page 12-37