®
Efficient Networks
Router family
Command Line Interface Guide
sdsl save
Saves SDSL configuration changes across restarts and reboots.
Mgmt Class
Network (R/W)
Input Format
sdsl save
Parameters
None
Response
Command prompt.
sdsl speed
Manages the speed of the SDSL line.
•
At the Central Office (CO) end, the command sets the speed manually only.
•
At the Customer Premises Equipment (CPE) end, the command can:
–
–
–
NOTE:
To re-instate auto-speed detection, enter an sdsl speed <speed> command.
Mgmt Class
Network (R/W)
Input Format
sdsl speed [<speed> | noauto]
®
Efficient Networks
Display the current speed setting and list the available speeds (sdsl
speed)
Manually set the speed ( sdsl speed <speed> )
Override auto-speed detection ( sdsl speed noauto )
Chapter 7: WAN Interface Commands
Page 7-33