Remote Setlns - Efficient Networks Router family Command Line Interface Manual

Chapter 9: L2TP Commands

remote setlns

With this command, this remote is the path to the LNS, and it will forward the incoming
call (which matches this remote entry) through the tunnel named <TunnelName> if
your router is the client.
NOTE:
The remote entry must also have appropriate information such as PPP authentication,
IP routing, IPX routing, bridging, or Caller ID.
Mgmt Class
Security (R/W)
Input Format
remote setLNS <tunnelname> <remotename>
Parameters
<tunnelname>
<remotename>
a
ASCII string
b
The name is case sensitive.
Response
Command prompt.
Page 9-18
a,b
Name of the tunnel.
,
a b
Name of the remote entry.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®