Ike Commit; Ike Flush - Efficient Networks Router family Command Line Interface Manual

Chapter 12: IKE/IPsec Commands

ike commit

Determines whether the IKE commit bit is set. By default, the commit bit is not set
(off).
If packets are not being processed correctly across an IPSec tunnel, try the command
i ke commit on so that the commit bit is set. Setting the commit bit makes sure that
no IPSec traffic arrives at the router before the router is ready for it.
Mgmt Class
Security (R/W)
Input Format
ike commit [ on | off | help]
Parameters
***
on
off
help
Response
Command prompt.

ike flush

Clears all IKE configuration information from the router. For more information about
IKE, see "IPSec (Internet Protocol Security)" on page 5-50.
Mgmt Class
Debug (R/W)
Input Format
ike flush
Parameters
None
Response
Command prompt.
Page 12-6
When entered with no parameter, the current value is displayed.
Commit bit is set.
Commit bit is not set. (Default value)
Displays help message.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®