Eth Ip Mgmt - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

eth ip mgmt

Assigns to an Ethernet interface an IP address which is to be used for management
purposes only and not for IP address translation. This management IP address is
generally a private network address used solely by the ISP.
The management IP address is separate from the IP address used for IP address
translation. The IP address used for address translation is generally a public IP
address valid on the Internet. It is set by the
NOTE:
The management address is not effective until after the next
NOTE:
To use the management address as the source address for a ping, you must specify it
using the -I option on the
192.168.1.2 when pinging destination address 192.168.100.100, specify:
ping -I 192.168.1.2 192.168.100.100
NOTE:
To use the management address as the source address for a copy, you must specify
both the source and destination addresses on the
To list the current management address for the Ethernet interface, if any, use the
list command. To set a management address for the WAN interface, see
setmgmtipaddr.
Mgmt Class
Network (R/W)
Input Format
eth ip mgmt <ipaddr> <ipnetmask> [<interface>]
®
Efficient Networks
Chapter 5: Ethernet Interface Commands
eth ip addr
ping command. For example, to use management address
command.
save and reboot.
copy command.
eth
remote
Page 5-27