Ike Peers Set Secret - Efficient Networks Router family Command Line Interface Manual

Chapter 12: IKE/IPsec Commands
Input Format
ike peers set peeridtype <ipaddr | domainname | email>
<peername>
Parameters
Choose one of the following:
ipaddr
domainname
email
<peername>
a
ASCII string
b
To see the peer names, use the
Example
-> ike peers set peeridtype domainname my_aggressive_peer
Response
Command prompt.

ike peers set secret

Sets the shared secret for the IKE peer connection. The secret must be identical for
both ends. For more information, see
Mgmt Class
Security (R/W)
Input Format
ike peers set secret <secret> <peername>
Parameters
a
<secret>
<peername>
a
ASCII string 1 - 256 characters; do not use spaces or non-printable characters.
b
ASCII string
c
To see the peer names, use the
Page 12-38
The peer ID must be an IP address.
The peer ID must be a domain name.
The peer ID must be an e-mail address.
a
Name of the IKE peer whose peer ID type is specified.
ike peers list
Secret.
b
Name of the IKE peer whose peer ID is specified.
ike peers list
Efficient Networks
Command Line Interface Guide
command.
"IKE Peer Commands" on page 5-56.
command.
®
Router family
b
c
®
Efficient Networks