Ipsec Set Mode - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
Parameters
a
<ident>
a
<saname>
a
ASCII string
b
To see the IPSec SA names in use, use the
Example
-> ipsec set ident 424242 show_rx
Response
Command prompt.

ipsec set mode

Selects the encapsulation mode (tunnel or transport) for the SA.
Mgmt Class
Security (R/W)
Input Format
ipsec set mode <tunnel | transport> <saname>
Parameters
tunnel | trans-
port
a
<saname>
a
To see the used IPSec SA names, use the
Example
-> ipsec set mode transport rtr2rtr
Response
Command prompt.
®
Efficient Networks
SPID for the IPSec tunnel.
Name of the IPSec SA.
Encapsulation method required for the connection. The default
value is TUNNEL.
Name of the IPsec SA to which the encapsulation mode param-
a
eter is added.
ipsec list
Chapter 12: IKE/IPsec Commands
b
ipsec list command.
command.
Page 12-55