System Vpnpassthru - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
Parameters
default
disabled
a
<port>
a
Integer
Examples
This command sets the Telnet port to the default value (23).
-> system telnetport default
This command disables the existing telnet port.
-> system telnetport disabled
This command remaps the telnet port to port 188.
-> system telnetpport 154
Response
Command prompt.

system vpnpassthru

Enables and disables VPN pass-through mode. When enabled, multiple concurrent
VPNs are allowed.
Mgmt Class
Network (R/W)
Input Format
system vpnpassthru enable | disable
Parameters
enable
disable
Response
Command prompt.
®
Efficient Networks
Restores the port value to the default value 23 and re-enables the
port.
Disables the existing Telnet port.
Defines a new Telnet port number. Use this option to restrict re-
mote access.
Enables the VPN pass-through mode.
Disables the VPN pass-through mode.
Chapter 4: System Commands
Page 4-67