Snmp Deltrapdest; Snmp Disablesnmpif - Efficient Networks Router family Command Line Interface Manual

Chapter 17: SNMP Commands

snmp deltrapdest

Deletes the IP address of a current SNMP Trap manager. To view the existing trap
addresses, use the command
page 7-2.
NOTE:
This command does not require a reboot and is effective immediately.
Mgmt Class
Network (R/W)
Input Format
snmp deltrapdest <ip addr>
Parameters
a
<ipaddr>
a
Dotted-decimal notation
Response
Command prompt.

snmp disablesnmpif

Disables SNMP access from the specified interface. To see the current interface(s)
enabled, use the command
NOTE:
This command does not require a reboot and is effective immediately.
Mgmt Class
Network (R/W)
Input Format
snmp disablesnmpif <wan|lan>
Page 17-6
snmp list. For additional information, see
IP address of the trap manager that will be deleted.
snmp list.
®
Efficient Networks Router family
Command Line Interface Guide
"SNMP" on
Efficient Networks
®