Voice Refreshcas - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

voice refreshcas

Defines the mode in which refresh CAS (channel associated signalling) cells will be
sent to the voice gateway.
NOTE:
A mode change is effective immediately. However you must perform a
if the change is to be persistent across reboots.
Mgmt Class
Voice (R/W)
Input Format
voice refreshcas active | always
Parameters
***
active
always
Example
The following command example will change the refresh cas mode to always.
-> voice refreshcas always
The following command example entered with no parameters to display the current
mode.
-> voice refreshcas
Refresh CAS signaling is currently "always".
Response
Command prompt.
®
Efficient Networks
When entered with no parameter, the current mode is displayed
CAS refresh signals are sent only when voice is present. Default
mode.
CAS refresh signals are sent both when voice is present and during
an idle state.
Chapter 13: Voice Commands
save command
Page 13-9