Remote Setsrcipaddr - Efficient Networks Router family Command Line Interface Manual

Chapter 6: Remote Commands

remote setsrcipaddr

Sets the IP address for the target WAN connection to the remote router. You may set
this address when the remote router requires the target and the remote WAN IP
addresses to be on the same subnetwork. Another instance is to force numbered
mode and to prevent the remote router from changing the target WAN IP address
through IPCP address negotiation. The target WAN IP address defaults to the
Ethernet LAN IP address.
Mgmt Class
Network (R/W)
Input Format
remote setsrcipaddr <ipaddr> <mask> <remotename>
Parameters
a
<ipaddr>
a
<mask>
<remotename>
a
Dotted-decimal notation
b
ASCII string
Response
Command prompt.
Page 6-66
Target IP address of the WAN connection to the remote rout-
er.
IP network mask of the remote router.
b
Name of the remote router.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®