System Backup Pinginterval - Efficient Networks Router family Command Line Interface Manual

Chapter 4: System Commands

system backup pinginterval

Changes the ping interval for a group, that is, the number of seconds between pings
during a test of the addresses in the group.
To see the current ping intervals, use the
about the ping interval and Dial Backup, see
Success Rate" on page 6-13
NOTE:
If you change the ping interval to 0, the group of addresses is disabled.
Mgmt Class
Network (R/W)
Input Format
system backup pinginterval <seconds> [<group>]
Parameters
<seconds>
b
<group>
a
Integer
b
integer, 0 - 65535 (0)
Examples
The following command changes the ping interval to 10 seconds for group 0.
-> system backup pinginterval 10
The following command disables the pinging of addresses in group 1.
-> system backup pinginterval
Response
Command prompt.
Page 4-22
of the Technical Reference Guide.
a
Number of seconds in the ping interval for the group.
Optional, number of a group.
Efficient Networks
Command Line Interface Guide
system list command. For more information
"Ping Interval, Number of Samples, and
0 1
®
Router family
®
Efficient Networks