Dsp Save - Efficient Networks Router family Command Line Interface Manual

Chapter 13: Voice Commands

dsp save

Saves the current DSP configuration parameters to flash memory.
Mgmt Class
Voice (R/W)
Input Format
dsp save
Parameters
None
Response
Command prompt.
dsp vr
Displays the current voice rate and encoding type.
Mgmt Class
Voice (R)
Input Format
dsp vr <port>
Parameters
***
a
<port>
a
Integer, 1 - 4 (or 1 - 8 for 8-port IADs)
Response
-> dsp vr 4
Ingress: G711 uLaw
Page 13-6
When entered with no parameter, the value for port 1 value is dis-
played.
Voice port to configure.
Egress: G711 uLaw
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®