Remote Setspeed - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

remote setspeed

Specifies the speed to be used when dialing out using the backup V.90 modem
connected to the console port. Specify a speed for each phone number you provide
(primary and alternative).
For more information specifying phone numbers for the Dial Backup feature, see
"Specifying the Dialup Parameters" on page 6-9.
Mgmt Class
Network (R/W)
Input Format
remote setspeed <bitrate> | default
Parameters
<bitrate>
default
1
2
<remotename>
a
Range - possible speeds are 38400, 57600, 115200, or 230400.
b
ASCII string
Examples
The following command specifies the primary phone number and its bit rate.
-> remote setphone async 1 9,5551288 backup
-> remote setspeed 115200 async 1 backup
The following commands specifies the alternative phone number to be used and its bit
rate.
-> remote setphone async 2 9,5551289 backup
-> remote setspeed 115200 async 2 backup
Response
Command prompt.
®
Efficient Networks
a
Bit rate to be used for the phone number.
Use the default speed.
Primary phone number.
Alternative phone number.
b
Name of the remote router.
Chapter 6: Remote Commands
async 1 | 2 <remotename>
Page 6-65