System Backup Pingsamples - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

system backup pingsamples

Changes the number of ping samples for a group, that is, the number of pings
performed for each address in the group.
To see the current ping sample values, use the
information about ping samples and Dial Backup, see
12 of the Technical Reference Guide.
NOTE:
If you change the ping samples value to 0, you disable pinging for that group of
addresses.
Mgmt Class
Network (R/W)
Input Format
system backup pingsamples <samples> [<group>]
Parameters
<samples>
b
<group>
a
Integer, (6)
b
integer, 0 - 65535 (0)
Examples
The following command changes the number of ping samples to 10 for addresses in
group 0.
-> system backup pingsamples
The following command disables the pinging of addresses in group 1.
-> system backup pingsamples
Response
Command prompt.
®
Efficient Networks
a
Number of times the addresses in the group are pinged.
Optional, number of a group.
Chapter 4: System Commands
system list command. For more
"Addresses to Ping" on page 6-
10
0 1
Page 4-23