Remote Setpppoptions - Efficient Networks Router family Command Line Interface Manual

Chapter 6: Remote Commands

remote setpppoptions

Enables and disables a PPP option.
The default settings vary with the option. To see the current settings of the PPP
options, use the command
Mgmt Class
Network (R/W)
Input Format
remote setpppoptions <option> on | off <remotename>
Parameters
<option>
on | off
<routername>
a
ASCII string
Example
The following command forces the router to always request a new IP address
whenever the PPP session is terminated. (This could be useful if the other PPP
system does not completely support IP address negotiation.)
-> remote setpppoptions reacqipaddr off HQ
Response
Command prompt.
Page 6-58
remote
Specify one of the following options:
Van Jacobson compression of TCP/IP headers (RFC 1144),
compression
also known as IPCP compression.
Always accept peer proposal for our WAN IP address.
ipslavemode
Use periodic echo (if permanent interface or PPPoE).
lcpecho
Try to reacquire the IP address. Turn this option off if the rout-
reacqipaddr
er should always request a new IP address when the PPP
session is terminated.
Use IPX RIP/SAP protocols.
ripsap
Desired setting for the option.
a
Name of the remote router
Efficient Networks
Command Line Interface Guide
list.
®
Router family
®
Efficient Networks