L2Tp Set Window - Efficient Networks Router family Command Line Interface Manual

Chapter 9: L2TP Commands
Response
Command prompt.

l2tp set window

Enhances traffic performance in a tunneling environment. The command's options
affect the way incoming payload packets are processed. The router is configured with
the following default options: sequencing, required, and size 10.
Mgmt Class
Security (R/W)
Input Format
l2tp set window sequencing|pacing|nosequencing|optional|
required|size <tunnelname>
Parameters
sequencing
pacing
nosequencing
optional
required
a
size
<tunnelname>
a
Size can be 0 for packet sequencing. Must be a non-zero value for window pacing. Size must be
less than or equal to 30.
b
ASCII string
c
The name is case sensitive.
Response
Command prompt.
Page 9-16
Sequence numbers are placed in the L2TP payload packets.
With this option, one end instructs the other end to send se-
quence packets. No acknowledgments are issued for re-
ceived packets.
Sequence numbers are placed in the L2TP payload packets.
When a session is created, the router specifies a window size.
Acknowledgments for received packets are issued.
No sequence numbers are placed in the L2TP payload pack-
ets carrying the PPP packets. If the remote end carries out se-
quencing or pacing, the router can still send and receive
sequenced packets.
Allows dynamic switching of a session from pacing or se-
quencing to nosequencing.
Disables dynamic switching from pacing or sequencing to
nosequencing.
Controls the size of the receive window for receiving packets
for sequencing or pacing, when a session is created.
b,c
Host name of the remote tunnel. This is the fully qualified do-
main name of the remote host.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®