Table of Contents
Advertisement
®
Efficient Networks
Router family
Command Line Interface Guide
dmt link
Selects the link type for the ADSL DMT router. The link type is persistent across
reboots.
Normally, the CO and CPE negotiate the link type to be used. Use the dmt link
command when you do not want the CO and CPE to negotiate the link type, but
instead want to specify the type of data link required.
CAUTION:
This command forces the CPE into the specified mode. It is not for normal use.
Mgmt Class
Network (R/W)
Input Format
dmt
link
Parameters
default
T1_413
G_DMT
G_LITE
MULTIMODE
Response
Command prompt.
®
Efficient Networks
DEFAULT | T1_413 | G_DMT | G_LITE | MULTIMODE
Default value. The CO and CPE negotiate the link type used.
ANSI standard T1.413
G.dmt standard
ITU G.Lite standard
The CO and CPE negotiate the link type used.
Chapter 7: WAN Interface Commands
Page 7-11
Advertisement
Table of Contents
