Dhcp Set Otherserver - Efficient Networks Router family Command Line Interface Manual

Chapter 8: DHCP Commands

dhcp set otherserver

Instructs the router's DHCP server to either continue or stop sending DHCP requests
when another DHCP server is detected on the LAN.
Mgmt Class
Network (R/W)
Input Format
dhcp set otherserver <net> continue | stop
Parameters
a
<net>
continue
stop
a
Dotted-decimal notation.
Response
Command prompt.
Page 8-22
IP address of the subnetwork lease.
The router's DHCP server continues sending DHCP requests, even if another
DHCP server is detected on the LAN.
The router's DHCP server stops sending DHCP requests when another DHCP
server is detected on the LAN. (This is the default value.)
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®