Save - Efficient Networks Router family Command Line Interface Manual

Chapter 2: Status Commands
Parameters
NOTE:
The word default cannot be abbreviated in the command.
***
factory
default
Response
User is prompted to verify the command.

save

The save command saves the entire router's configuration or parts of it to FLASH
memory. The keyword in the command determines what is saved.
NOTE:
There is a time lag between the response issued by the save command and the time
when the data is actually stored in FLASH memory. Issue a sync command after a
save command before powering off the router. This commits the changes to FLASH
memory.
Mgmt Class
All (R/W)
Input Format
save
Parameters
None
Response
Command prompt.
Page 2-22
If no option is specified, the router is rebooted using the existing con-
figuration file.
This option deletes all files except AUTOEXEC.OLD if it exists. AU-
TOEXEC.OLD is renamed AUTOEXEC.BAT; it is re-executed by the
reboot. This option also resets the non-volatile RAM; thus deleting the
IP address of the router and the TFTP server during the boot process
and also forcing the router to boot from FLASH instead of from the net-
work.
This option deletes the system configuration file and restores the router
to its original defaults (before any configuration was entered).
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®