Ike Ipsec Policies Enable - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

ike ipsec policies enable

Enables an IPSec policy. An enable command is required for each new policy; the
enable command indicates that the specification of the policy is complete and the
policy is ready to be used. The enable command can also be used to re-enable a
disabled policy. For more information, see
61.
Mgmt Class
Security (R/W)
Input Format
ike ipsec policies enable <policyname>
Parameters
<policyname>
a
ASCII string
b
To see the policy names in use, use the
Example
-> ike ipsec policies enable mypolicy
Response
Command prompt.
®
Efficient Networks
a
Name of an existing IPsec policy.
ike ipsec policies list
Chapter 12: IKE/IPsec Commands
"IKE IPSec Policy Commands" on page 5-
b
command.
Page 12-9