Remote Setl2Tpclient - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

remote setl2tpclient

With this command, this remote is the path to the L2TP client and accepts tunnel
calls. Use this command if your router acts as an LNS. You must also specify PPP
authentication and IP routes for this remote.
Mgmt Class
Security (R/W)
Input Format
remote setl2tpclient <tunnelname><remotename>
Parameters
<tunnelname>
<remotename>
a
ASCII string
b
The name is case sensitive.
Response
Command prompt.
®
Efficient Networks
a,b
Host name of the remote tunnel associated with the remote LAC.
,
a b
Name of the remote entry.
Chapter 9: L2TP Commands
Page 9-17