Ike Ipsec Policies Set Protocol - Efficient Networks Router family Command Line Interface Manual

Chapter 12: IKE/IPsec Commands

ike ipsec policies set protocol

Defines a protocol filtering parameter value for the policy. The protocol parameter
requires a specific protocol that must be used or allows any protocol (*).
Mgmt Class
Security (R/W)
Input Format
ike ipsec policies set protocol <protocolnumber | tcp | udp |
*> <policyname>
Parameters
<protocolnumber>
tcp
udp
*
<policyname>
a
ASCII string
b
To see the policy names, use the
Examples
-> ike ipsec policies set protocol * mypolicy
-> ike ipsec policies set protocol tcp webpolicy
Response
Command prompt.
Page 12-18
Protocol required by the policy. The protocol can be specified
by number or by name (TCP or UDP). To allow data through
for any protocol, specify an asterisk (*).
a
Name of the IPsec policy to which the protocol parameter val-
b
ue is added.
ike ipsec policies list
Efficient Networks
Command Line Interface Guide
command.
Efficient Networks
®
Router family
®