Chapter 6: Remote Commands
Exchange spanning tree with dest... no
TX Encryption........................ unknown
RX Encryption........................ unknown
mtu.................................. 1500
remote listbridge
Lists the current bridge settings for the specified remote router entry.
Mgmt Class
Network (R/W)
Input Format
remote listbridge <remotename>
Parameters
***
<remotename>
a
ASCII string
Response
Typical response when entered with no <remotename> parameter:
-> rem listbridge
BRIDGING INFORMATION FOR <internet>
Bridging enabled..................... yes
Exchange spanning tree with dest... no
Bridge only PPPoE with dest........ no
BRIDGING INFORMATION FOR <efficient>
Bridging enabled..................... yes
Exchange spanning tree with dest... no
Bridge only PPPoE with dest........ no
Mac addresses that dial remote..... none
Page 6-36
If entered with no parameters, bridge settings for all re-
mote routers entries are listed.
a
Name of the remote router.
®
Efficient Networks
Router family
Command Line Interface Guide
Efficient Networks
®