Ike Ipsec Proposals Set Espenc - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide

ike ipsec proposals set espenc

Sets the proposal parameter that determines whether ESP encryption is requested
and, if it is requested, the encryption method used.
For more information, see
"IKE IPSec Proposal Commands" on page 5-58.
Mgmt Class
Security (R/W)
Input Format
ike ipsec proposals set espenc <des | 3des | null | none>
<proposalname>
Parameters
des
3des
null
none
<proposalname>
a
ASCII string
b
To see the proposal names in use, use the
Example
-> ike ipsec proposals set espenc 3des myproposal
Response
Command prompt.
®
Efficient Networks
"ESP and AH Security Protocols" on page 5-51.
Use ESP encapsulation and 56-bit encryption.
Use ESP encapsulation and 168-bit encryption (if 3DES is en-
abled in the router)
No encryption, but use ESP encapsulation. Headers are inserted
as though the data was encrypted. This allows verification of the
source, but sends the data in the clear, increasing throughput.
No encryption and no ESP encapsulation. (If you select this option,
the encapsulation method must be requested by a
or
als set espauth ike ipsec proposals set ahauth
a
Name of the IPsec proposal to which the ESP encryption parame-
b
ter is added.
ike ipsec proposals list
Chapter 12: IKE/IPsec Commands
ike ipsec propos-
command.)
command.
Or, see
Page 12-27