Chapter 6: Remote Commands
remote setprotocol
Sets the link protocol for the remote router.
NOTE:
The link protocol and encapsulation option must match those at the other end of the
connection (the settings in the DSLAM).
The encapsulation options are described in
the Technical Reference manual.
Mgmt Class
Network (R/W)
Input Format
remote setProtocol
| RAWIP
Parameters
ppp
ppplc
rfc1483
rfc1483mer
fr8
rawip
<remotename>
a
ASCII string
Response
Command prompt.
Page 6-62
PPP | PPPLLC | RFC1483 | RFC1483MER | FRF8
<remotename>
PPP protocol with VC multiplexing encapsulation.
PPP protocol with LLC SNAP encapsulation (used with frame
relay internetworking units).
RFC 1483 protocol.
RFC 1483MER (MAC Encapsulated Routing) protocol.
This protocol implements ATM to frame relay as defined in the
Frame Relay Forum FRF.8 Interworking Agreement.
RawIP protocol.
a
Name of the remote router.
Efficient Networks
Command Line Interface Guide
"Encapsulation Options"
®
Router family
in Chapter 2 of
®
Efficient Networks