®
Efficient Networks
Router family
Command Line Interface Guide
This chapter contains subsections of commands applicable to specific WAN
interfaces. The subsections are:
•
ADSL (Asymmetric Digital Subscriber Line) commands, see
Commands.
•
ADSL, Annex B commands, see
•
ATM (Asynchronous Transfer Mode) commands, see
•
DMT (Discrete Multi-Tone) commands, see
•
Dual-Ethernet commands, see
•
Frame Relay commands, see
•
HDSL (High-speed Digital Subscriber Line) commands, see
Commands.
•
IDSL (ISDN Digital Subscriber Line) commands, see
•
SDSL (Symmetric Digital Subscriber Line) commands, see
Commands.
•
G.shdsl commands, see
NOTE:
If you are unsure which set of commands is applicable to your system, enter a ? at the
command prompt and look for one of the WAN interface key words listed in the top-
level command listing. The response, for example sdsl or adsl, indicates the
appropriate command set to use.
®
Efficient Networks
WAN INTERFACE COMMANDS
CHAPTER 7
SHDSL
Chapter 7: WAN Interface Commands
GTI
Commands.
DMT
Commands.
Dual-Ethernet Router (ETH)
Frame
Commands.
Commands.
CHAPTER 7
ADSL
ATM
Commands.
Commands.
HDSL
IDSL
Commands.
SDSL
Page 7-1