Chapter 2: Status Commands
sntp enable
Enables SNTP requests.
Mgmt Class
Admin (R/W)
Input Format
sntp enable
Parameters
None
Response
-> sntp enable
Current offset from UTC is 0 minutes
Use <system sntp offset> to set time zone
sntp offset
Specifies the SNTP offset from the Universal Time Coordinate (UTC). The offset is
specified in minutes. A positive offset is an offset to the east of the Greenwich
meridian; a negative offset is to the west of the Greenwich meridian.
Mgmt Class
Admin (R/W)
Input Format
sntp offset <minutes>
Parameters
***
<minutes>
a
Integer 1 - 59
Page 2-24
When no parameter is entered, current offset is displayed.
a
Number of minutes east or west of the Greenwich meridian. A pos-
itive number is east; a negative number is west.
®
Efficient Networks
Router family
Command Line Interface Guide
Efficient Networks
®