Sdsl Preact - Efficient Networks Router family Command Line Interface Manual

Chapter 7: WAN Interface Commands

sdsl preact

Displays and/or changes the autobaud pre-activation status.The default status is on.
However, to be effective, autobaud pre-activation must also be enabled at the Central
Office (CO) end of the connection.
NOTE:
Remember to enter an
restarts and reboots.
For more information on the autobaud feature, see Auto-baud preactivation.
Mgmt Class
Network (R/W)
Input Format
sdsl preact [on | off]
Parameters
on
off
a
To be effective, pre-activation must also be enabled at the CO end.
Response
SDSL preactivation status is displayed.
Preactivation enabled
Preactivation disabled
Page 7-32
sdsl save or save
Enables pre-activation at the customer premises equipment
a
(CPE) end.
Disables pre-activation.
Efficient Networks
Command Line Interface Guide
command to save SDSL changes across
®
Router family
®
Efficient Networks