Table of Contents
Advertisement
®
Efficient Networks
Router family
Command Line Interface Guide
This section contains L2TP command descriptions. For a complete discussion of
L2TP tunneling, see
Technical Reference Guide. The L2TP commands allow you to:
•
Add, delete, and modify tunnels
•
Configure L2TP router information including:
•
Names
•
Security authentication protocols and passwords
•
Addresses
•
Management of traffic performance
•
Restrict a tunnel so it can be established only with a specific remote interface
(l2tp set
The L2TP commands found in this section include:
Command
l2tp ?
l2tp add
l2tp call
l2tp close
l2tp del
l2tp forward
l2tp list
®
Efficient Networks
"L2TP Tunneling — Virtual Dial-Up" on page 6-26
wanif).
Table 9-1: L2TP Command Listing
Lists the supported L2TP keywords.
Creates a tunnel entry.
Establishes a tunnel without creating a session.
Closes an L2TP tunnel and/or session.
Selects adaptive or fixed rate mode.
Configures the router to forward all incoming calls
to an LNS without answering the incoming call.
Display of the current configuration settings for tun-
nel(s), except for the authentication password/se-
cret.
Chapter 9: L2TP Commands
CHAPTER 9
L2TP COMMANDS
CHAPTER 9
Function
of the
Page 9-1
Advertisement
Table of Contents
