Ike Ipsec Proposals Set Espauth - Efficient Networks Router family Command Line Interface Manual

Chapter 12: IKE/IPsec Commands

ike ipsec proposals set espauth

Sets the proposal parameter that determines whether ESP message authentication is
requested and, if it is requested, the hash algorithm used.
For more information, see
"IKE IPSec Proposal Commands" on page 5-58.
Mgmt Class
Security (R/W)
Input Format
ike ipsec proposals set espauth <md5 | sha1 | none>
<proposalname>
Parameters
md5
sha1
none
<proposalname>
a
ASCII string
b
To see the proposal names in use, use the
Example
-> ike ipsec proposals set espauth sha1 myproposal
Response
Command prompt.
Page 12-26
"ESP and AH Security Protocols" on page 5-51.
Use ESP encapsulation and authenticate using hash algorithm
Message Digest 5.
Use ESP encapsulation and authenticate using hash algorithm
Secure Hash Algorithm-1.
No ESP encapsulation and no ESP message authentication. (If
you select this option, the encapsulation method must be request-
ed by a
ike ipsec proposals set espenc
command.)
auth
a
Name of the IPsec proposal to which the ESP authentication pa-
b
rameter is added.
ike ipsec proposals list
®
Efficient Networks Router family
Command Line Interface Guide
or
ike ipsec proposals set esp-
command.
Efficient Networks
Or, see
®