System Securemode Set Cli - Efficient Networks Router family Command Line Interface Manual

Chapter 4: System Commands
Parameters
enable
disable
Response
Typical response indicating the curent mode is displayed.
System Secure Mode set to "ENABLED".

system securemode set cli

Sets the number of concurrent telnet and SSH sessions allowed by the system.
NOTE:
The number of sessions allowed is a system setting and independent of the secure
mode state (enabled or disabled).
NOTE:
If the number of sessions allowed is set to <0>, access to the command line interface
will be available only through the serial console connection.
Mgmt Class
Security (R/W)
Input Format
system securemode set cli <value>
Parameters
a
<value>
a
Integer, 0 - 8 (8)
Response
Typical response:
System CLI limit set to 7.
Page 4-48
Enables secure mode.
Disables secure mode.
Number of Telnet and SSH sessions allowed.
®
Efficient Networks Router family
Command Line Interface Guide
Efficient Networks
®