Firewall ? - Efficient Networks Router family Command Line Interface Manual

Chapter 18: Stateful Firewall Commands
Command
firewall seticmpflood-
threshold
firewall setsynflood-
threshold
firewall setudpflood-
threshold
firewall viewdroppkts
firewall watch

firewall ?

Lists the supported firewall keywords. To see the syntax for a command, enter the
command followed by a ?.
Mgmt Class
Security (R)
Input Format
firewall ?
Parameters
None
Response
A listing of all the supported firewall commands and keywords with a brief description
of their function.
Page 18-2
Table 18-1: Firewall Command Listing (Cont.)
Sets the threshold value for the number of ICMP
packets per second, which when exceeded, will
cause the firewall to block any subsequent ICMP
packets until the ICMP traffic drops below the
threshold value.
Sets the threshold value for the number of SYN
packets per second, which when exceeded, will
cause the firewall to block any subsequent SYN
packets until the SYN traffic drops below the
threshold value.
Sets the threshold value for the number of UDP
packets per second, which when exceeded, will
cause the firewall to block any subsequent UDP
packets until the UDP traffic drops below the
threshold value.
Displays a listing of up to 200 of the most recent
dropped packets.
Enables and disables the console watch for firewall
messages.
Efficient Networks
Command Line Interface Guide
Function
Efficient Networks
®
Router family
®