Ike Ipsec Policies Set Peer - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
Parameters
tunnel | transport
<policyname>
a
To see the policy names, use the
Example
-> ike ipsec policies set mode transport rtr2rtrpolicy
Response
Command prompt.

ike ipsec policies set peer

Defines a peer filtering parameter value for the policy. The peer parameter specifies
an IKE peer that may be used for the connection. (The peer must have been defined
by IKE peer commands; see
Mgmt Class
Security (R/W)
Input Format
ike ipsec policies set peer <peerpame> <policyname>
Parameters
<peername>
<policyname>
a
Name of an IKE peer. To see the IKE peer names, use the
b
To see the policy names, use the
Example
-> ike ipsec policies set peer my_aggressive_peer mypolicy
Response
Command prompt.
®
Efficient Networks
Encapsulation method required for the connection. The de-
fault value is TUNNEL.
a
Name of the IPsec policy to which the encapsulation mode
parameter value is added.
ike ipsec policies list
"IKE Peer Commands" on page
Name of an IKE peer.
a
Name of the IPsec policy to which the encapsulation mode pa-
rameter value is added.
ike ipsec policies list
Chapter 12: IKE/IPsec Commands
a
command.
a
b
ike peers list command.
command.
5-56.)
Page 12-15