Pppoe Commands; Remote Setpppoeservice - Efficient Networks Router family Command Line Interface Manual

®
Efficient Networks Router family
Command Line Interface Guide
This section contains the commands that are specific to PPPoE (PPP over Ethernet).
To learn more about PPPoE configuration and management, see
Ethernet)" on page 6-41.
The PPPoE commands found in this section include:
Command

remote setpppoeservice

pppoe close
pppoe list
remote setpppoeservice
Defines the remote router entry as a PPPoE remote entry. It also specifies the service
to which PPPoE users connect through this remote entry.
NOTE:
Enter this command immediately after the
remote router entry.
Mgmt Class
Data (R/W)
Input Format
remote setPPPoEservice <service> | * | -
®
Efficient Networks
Table 11-1: Bridge Filtering Command Listing
Defines the remote router entry as a PPPoE re-
mote entry.
Closes a currently active PPPoE session.
Lists information about the currently active PPPoE
sessions.
Chapter 11: PPPoE Commands

PPPOE COMMANDS

CHAPTER 11
Function
remote add command that defines the
<remotename>
CHAPTER 11
"PPPoE (PPP over
Page 11-1